Green Air CT-DH-3 Cooling Thermostat & Dehumidistat
Green Air Synchronized Cooling Thermostat & Dehumidistat 4 Outlets Model CT-DH-3
Synchronized Outlets
|

|
While the CT-DH-3 has many applications, it was primarily developed for use with CO2 equipment and exhaust/ventilation fans. The left side (or equipment) outlets of the controller are normally "ON" until defeated when the right side outlets are activated. Internal sensors will allow for 7ºF temperature zone and a 5% humidity differential between the time that the fans come "ON" and then turn "OFF" again. When temperature or humidity rises above your dial set points, the right outlets will activate and the left outlets will deactivate. The right side outlets will remain “ON” until the temperature drops 7º and/or the humidity drops 5% below your set points. At which time, the right outlets will shut “OFF” and reactivate the left outlets.
OPTIONAL PHOTOSENSOR
The CT-DH-3 is also available with a built in photosensor (CT-DH-3P) to defeat the left outlets during periods of darkness. This optional feature is especially useful when using the controller in conjunction with CO2 enrichment systems.
|
| Exhaust or ventilation fans, cooling or dehumidifying equipment should be plugged into right side outlets. CO2 enrichment systems or other equipment you want to defeat during exhaust cycles, should be plugged into left side outlets. |
 |
Installation Example
 |
The CT-DH-3 operates on 120 Volt AC with 15 Amp maximum switching capacity and is intended for indoor use only. Be sure to locate your atmospheric controller where it will accurately sample and respond to the average air conditions. Good air circulation around the controller and in your garden space is essential. Avoid locating the controller in a draft or in direct sunlight. |
If you have any questions, feel free to ask.
Shipping & Handling is Free for this item
Hawaii, Alaska, and International shipping will be Extra.
Manufacturer: Green Air
SKU: 702335